In this guide
The Number Behind Every Calorie Target {#the-number-behind}
You enter your age, height and weight into a BMR calculator. A moment later, it gives you a confident-looking number: 1,340 calories per day.
From that figure, a TDEE calculator estimates your maintenance calories. A calorie-deficit calculator uses the estimate to suggest a fat-loss target. A macro calculator then divides your daily calories into protein, carbohydrates and fat.
It is an elegant chain of calculations. But there is an important question most people never ask:
How accurate is the BMR number at the beginning of that chain?
Basal metabolic rate (BMR) represents the energy your body needs to maintain essential functions at complete rest. It includes the energy required for breathing, circulation, brain activity, organ function and temperature regulation.
Because resting metabolism accounts for a substantial proportion of daily energy expenditure, an inaccurate estimate can affect every calculation that follows.
Research has shown that commonly used equations do not predict resting metabolism equally well in every individual or population. Different equations can produce noticeably different estimates for the same person, while studies in some populations have found systematic overestimation or underestimation.
This does not mean BMR calculators are useless. It means their results should be understood as estimates rather than direct measurements.
In this guide, we compare the major equations, examine the research behind their accuracy, explain why population differences matter and show how to use real-world weight trends to make your calorie estimates more useful.
The short version: BMR equations estimate resting energy expenditure from measurements such as age, weight, height and sometimes lean body mass. Mifflin–St Jeor is a widely used starting point, but no equation is accurate for everyone. In one study of 486 normal-weight Chinese adults, Schofield and Henry overestimated average measured BMR by approximately 9% and 7.5%, respectively. Individual errors were much wider. The best approach is to use a validated equation as a starting estimate and evaluate it against your actual weight and food-intake trends.
BMR, RMR and TDEE: The Three Terms People Mix Up {#bmr-rmr-tdee}
Before comparing equations, it helps to understand three terms that are often used interchangeably.
Term | What it means | Important distinction |
|---|---|---|
BMR (basal metabolic rate) | Energy required to maintain essential body functions under strict resting conditions | Measured under carefully controlled conditions |
RMR (resting metabolic rate) | Energy used by the body at rest under less restrictive measurement conditions | Usually slightly higher than BMR |
TDEE (total daily energy expenditure) | Total energy used throughout the day | Includes resting metabolism, activity and digestion |
BMR measurements generally require an overnight fast, physical rest, a thermoneutral environment and carefully controlled testing conditions.
RMR measurements use less restrictive conditions. This is one reason resting metabolic rate is often slightly higher than basal metabolic rate.
In everyday nutrition practice, the distinction is important scientifically but less important when using an ordinary online calculator. Many popular calculators use the same predictive equations to estimate BMR or RMR.
Where do your daily calories go?
Your total daily energy expenditure includes several components:
Resting energy expenditure: Energy used to maintain essential functions.
Thermic effect of food (TEF): Energy required to digest, absorb and process food. It commonly accounts for approximately 8–10% of daily energy expenditure, although the proportion varies with diet.
Physical activity: Includes planned exercise and everyday movement such as walking, standing, household work and fidgeting.
Other adaptive processes: Changes in energy expenditure associated with environmental conditions, body-weight changes and physiological adaptation.
Resting expenditure is often around 60–75% of daily energy expenditure in adults, although this proportion varies substantially with activity, body composition and other factors.
Our TDEE calculator estimates total daily energy expenditure by applying an activity multiplier to estimated resting energy expenditure.
This means an error in the initial resting estimate can carry through into the final maintenance-calorie estimate.
Where Your Resting Calories Actually Go {#where-the-energy-goes}
A common misconception is that muscle is the largest consumer of energy when the body is resting.
Muscle is metabolically active, but certain organs use considerably more energy per kilogram of tissue.
Research based on estimates of organ and tissue-specific metabolic rates has reported the following approximate values:
Tissue or organ | Approximate energy use (kcal/kg/day) | Why it matters |
|---|---|---|
Heart and kidneys | 440 | Very high metabolic activity per kilogram |
Brain | 240 | Uses substantial energy despite its relatively small size |
Liver | 200 | Supports many essential metabolic processes |
Skeletal muscle at rest | 13 | Large total mass, but relatively low energy use per kilogram |
Fat tissue | 4.5 | Lower resting energy use per kilogram |
These figures are approximate tissue-specific estimates, not universal measurements for every person.
The important point is that organs such as the brain, liver, heart and kidneys have much higher metabolic rates per kilogram than skeletal muscle or fat tissue.
This helps explain why two people with the same body weight may have different resting energy requirements.
Their body composition, organ mass, age, physiological condition and other individual characteristics can all contribute to differences.
It also puts the popular advice to build muscle for a faster metabolism into perspective. Strength training is extremely valuable for health, strength and body composition, but the direct increase in resting energy expenditure from adding a small amount of muscle is generally modest.
The Equations, Side by Side {#the-equations}
Several equations are used to estimate BMR or resting energy expenditure. They were developed using different populations and measurement datasets.
The following formulas use:
W: Weight in kilograms
H: Height in centimetres
A: Age in years
LBM: Lean body mass in kilograms
All results are expressed in kilocalories per day (kcal/day).
1. Mifflin–St Jeor equation (1990)
Men:
BMR = 10 × W + 6.25 × H − 5 × A + 5
Women:
BMR = 10 × W + 6.25 × H − 5 × A − 161
The equation was developed from measurements in 498 healthy adults, including 264 normal-weight and 234 obese participants.
It is widely used because it performed comparatively well in research evaluating common resting metabolic rate prediction equations.
It is a useful starting point for many adults, but it is not a direct measurement and does not eliminate individual prediction error.
2. Revised Harris–Benedict equation (1984)
Men:
BMR = 88.362 + 13.397 × W + 4.799 × H − 5.677 × A
Women:
BMR = 447.593 + 9.247 × W + 3.098 × H − 4.330 × A
The original Harris–Benedict equations date back to 1919. Roza and Shizgal reevaluated the equations in 1984 using additional data and published revised coefficients.
The revised equation remains common in nutrition calculators and clinical references. However, its predictions can differ from Mifflin–St Jeor, particularly in some populations.
3. Schofield equation (1985; FAO/WHO/UNU)
For adults aged 30–60 years:
Men:
BMR = 11.472 × W + 873.1
Women:
BMR = 8.126 × W + 845.6
Schofield equations were developed from a large historical database and became an important part of international energy-requirement recommendations.
However, the original database contained a disproportionate number of Italian participants and relatively few people from tropical regions. This raised questions about how well the equations performed in populations that were not adequately represented in the original data.
4. Henry equation (2005)
For adults aged 30–60 years:
Men:
BMR = 14.2 × W + 593
Women:
BMR = 9.74 × W + 694
Henry developed revised equations using a larger and more geographically diverse dataset.
The work addressed concerns about the representation of populations in earlier BMR research and produced equations that generally estimated lower BMR values than the FAO/WHO/UNU equations in several adult groups.
5. Katch–McArdle equation
Both sexes:
BMR = 370 + 21.6 × LBM
This equation uses lean body mass rather than total body weight.
It can be useful when a reasonably accurate estimate of body composition is available. However, an inaccurate body-fat estimate will also affect the result.
6. Cunningham equation
Both sexes:
Resting energy expenditure = 500 + 22 × LBM
This equation is commonly discussed in sports nutrition and athletic settings.
It uses lean body mass as its main predictor and can produce different results from equations based on age, height and total weight.
Which equation should you choose?
There is no single equation that is guaranteed to be the most accurate for every individual.
Mifflin–St Jeor is a reasonable general starting point for many adults. Lean-mass-based equations may be useful when body composition is known with reasonable accuracy. Population-specific equations may perform better in the groups in which they were developed and validated.
The best choice also depends on the intended use, the person's characteristics and the availability of measured resting energy expenditure.
If you want to compare your own estimates, try our BMR calculator. You can also use our body fat calculator to estimate lean body mass for equations that require it.
Two Worked Examples {#worked-examples}
To see why equation choice matters, consider two hypothetical adults.
Man: 30 years old, 75 kg, 175 cm, approximately 15% body fat.
Woman: 30 years old, 62 kg, 165 cm, approximately 28% body fat.
Applying the equations produces the following estimates:
Equation | Man (kcal/day) | Woman (kcal/day) |
|---|---|---|
Mifflin–St Jeor | 1,699 | 1,340 |
Harris–Benedict (revised) | 1,763 | 1,402 |
Schofield (30–60) | 1,734 | 1,349 |
Henry (30–60) | 1,658 | 1,298 |
Katch–McArdle | 1,747 | 1,334 |
Cunningham | 1,903 | 1,482 |
Approximate difference between highest and lowest | 245 | 184 |
The lean-mass equations use the estimated lean body mass of each example.
The same person can receive several different estimates depending on the equation selected.
For the man, the difference between the lowest and highest estimates is approximately 245 kcal/day. For the woman, it is approximately 184 kcal/day.
That is a meaningful difference when someone is using the result to plan a calorie deficit or maintenance diet.
However, the highest estimate is not automatically wrong, and the lowest is not automatically correct. Each equation has its own development population, assumptions and prediction error.
This is why comparing formulas is useful, but measuring or calibrating actual energy needs is even more valuable.
How Accurate Are BMR Equations? {#how-accurate}
Predictive equations estimate resting metabolism from a small number of characteristics. They do not measure the energy your body actually uses.
One of the frequently cited studies in this area is the systematic review by Frankenfield, Roth-Yousey and Compher, published in the Journal of the American Dietetic Association in 2005.
The review compared commonly used resting metabolic rate equations in healthy non-obese and obese adults. Mifflin–St Jeor performed comparatively well among the equations evaluated.
The review reported that Mifflin–St Jeor predicted resting metabolic rate within 10% of measured values for approximately 82% of non-obese adults and 70% of adults with obesity.
These results are useful, but they require careful interpretation.
What does accuracy within 10% actually mean?
Suppose a laboratory measures someone's resting energy expenditure at 1,500 kcal/day.
A prediction within 10% would fall approximately between:
1,350 kcal/day
1,650 kcal/day
Even an equation that falls within this range may be off by 100 calories or more.
And if a prediction falls outside the 10% range, the difference can be larger still.
Average bias is not individual accuracy
There are two different questions when evaluating a prediction equation:
Does the equation overestimate or underestimate the average result in a population?
How close is the equation to the measured result for each individual?
An equation may have a small average error because overestimates and underestimates cancel each other out.
That does not mean it predicts every individual accurately.
Researchers therefore examine more than average differences. They may also report prediction accuracy, standard error, correlation and limits of agreement.
This distinction becomes especially important when comparing equations across different populations.
Why Population Differences Matter {#population-differences}
Many popular BMR equations were developed using historical datasets that did not represent every population equally.
The Schofield database, for example, included a large proportion of Italian participants and relatively few people from tropical regions.
In 2005, C. J. K. Henry reviewed the historical development of BMR equations and examined the limitations of the original database.
The review highlighted concerns about the universal application of the FAO/WHO/UNU equations and developed alternative equations using a larger dataset that included more participants from tropical populations.
This research does not establish that every person from a particular ethnicity has a lower BMR. It demonstrates that an equation developed from one population may not perform equally well in another.
What did research in Chinese adults find?
A 2023 study published in Nutrients examined BMR prediction equations in normal-weight Chinese adults.
The researchers compared predicted values with measurements obtained using indirect calorimetry.
In an analysis involving 486 participants, the mean measured BMR was approximately 1,315 kcal/day.
The corresponding mean predictions included:
Equation | Mean predicted BMR | Difference from measured average |
|---|---|---|
Measured BMR | 1,315 kcal/day | Reference |
Schofield | 1,438 kcal/day | Approximately 9% higher |
Henry | 1,414 kcal/day | Approximately 7.5% higher |
Harris–Benedict | 1,579 kcal/day | Approximately 20% higher |
These are population averages, not correction factors for every individual.
The study also reported substantial individual variation. For example, Schofield overestimated measured BMR in 48.4% of participants and underestimated it in 13.2%.
This illustrates why it would be incorrect to assume that every Chinese adult, or every person of East Asian ancestry, should automatically reduce a calculator result by a fixed percentage.
What about South Asian populations?
Henry's 2005 review raised concerns about the performance of older FAO/WHO/UNU equations in several populations that were underrepresented in the original database.
However, findings from one population cannot simply be applied to every South Asian individual.
Body composition, age, sex, body size, health, environment and other factors may all contribute to differences in resting energy expenditure.
There is also a distinction between research showing that an equation has average bias in a group and research establishing a reliable correction factor for an individual.
The practical takeaway: If you are South Asian or East Asian, it is reasonable to recognize that some commonly used equations may be less accurate for your population. But do not automatically subtract 5%, 10% or another fixed percentage from your BMR result. Use it as a starting estimate and evaluate it against your real-world energy needs.
Can a population-specific equation be more accurate?
Yes, in some circumstances.
A 2016 study by Camps and colleagues developed and evaluated a Singapore equation for Chinese adults.
In its cross-validation group, the equation achieved approximately 80% accuracy within 10% of measured BMR.
This is a useful example of why population-specific validation matters.
However, the equation was developed and tested in Chinese adults. It should not automatically be treated as a validated equation for South Asian, European, African or other populations.
A formula that performs well in one group is not necessarily the best formula for everyone.
Why the Gap Exists {#why-the-gap}
There is no single explanation for differences between predicted and measured resting metabolism.
Several factors may contribute.
1. Representation in the original research
Older equations were developed from particular groups of people.
If a dataset contains relatively few participants from a specific geographical or demographic population, the resulting equation may not represent that population equally well.
2. Body composition
Two people with the same body weight can have very different proportions of muscle, fat and other tissues.
Lean body mass is generally a stronger predictor of resting energy expenditure than total body weight alone.
However, lean body mass is not metabolically uniform. Organs and skeletal muscle have very different energy requirements.
3. Age and physiological differences
Resting energy expenditure is influenced by age, body composition, hormonal conditions, health and other physiological characteristics.
Age alone does not explain every change in metabolic rate.
4. Environmental and lifestyle factors
Temperature, recent exercise, food intake, sleep and other conditions can affect resting energy expenditure measurements.
This is why laboratory measurements require controlled conditions.
5. Individual biological variation
Even people with similar age, height, weight and body composition may not have identical resting energy expenditure.
Prediction equations cannot capture every factor that influences an individual's metabolism.
6. Measurement limitations
Indirect calorimetry is a widely used method for measuring resting energy expenditure, but results can still be influenced by testing conditions, equipment and protocol.
A prediction equation is therefore an estimate of a complex biological measurement, not a perfect substitute for it.
How to Calibrate Your Calorie Needs {#how-to-correct}
You do not necessarily need laboratory testing to make a BMR-based calorie estimate more useful.
For everyday weight-management purposes, consistent food tracking and body-weight trends can help you evaluate whether your estimated maintenance calories are realistic.
The key is to collect enough consistent information before changing your calorie target.
Step 1: Start with a reasonable equation
Use our BMR calculator to estimate resting energy expenditure.
Then use the TDEE calculator to estimate daily maintenance calories based on your activity level.
Remember that BMR and maintenance calories are not the same thing.
Step 2: Establish a consistent calorie intake
For approximately three to four weeks, aim for a reasonably consistent intake rather than making frequent changes.
Track food portions as accurately as possible.
Include items that are often forgotten:
Cooking oil and butter
Sauces and dressings
Drinks and sweetened beverages
Snacks and small bites
Restaurant meals and portion differences
Inaccurate food logging can make an otherwise reasonable calorie estimate appear incorrect.
Step 3: Weigh yourself consistently
If weighing yourself is appropriate for your situation, measure under similar conditions each morning:
After waking
After using the bathroom
Before eating or drinking
With similar clothing or without clothing
Do not judge your progress from one reading.
Daily body weight naturally fluctuates because of hydration, sodium, carbohydrate intake, digestion and other factors.
Step 4: Compare weekly averages
Calculate a seven-day average rather than comparing individual days.
For example:
Week | Average body weight |
|---|---|
Week 1 | 75.0 kg |
Week 2 | 74.8 kg |
Week 3 | 74.7 kg |
Week 4 | 74.6 kg |
This pattern suggests a gradual downward trend.
A stable average over several weeks may suggest that your current calorie intake is close to maintenance, provided your tracking and activity are reasonably consistent.
For people who menstruate, comparing similar phases of the menstrual cycle can make trends easier to interpret because temporary water retention may obscure changes.
Step 5: Adjust cautiously
If your weight is consistently moving in an unintended direction, review your tracking and activity before changing calories.
If an adjustment is appropriate, small changes of approximately 100–200 kcal/day may be more manageable than large changes.
Then allow enough time to evaluate the result.
Do not make repeated adjustments based on a few days of scale readings.
Step 6: Reassess after significant weight changes
As body weight changes, energy requirements can change too.
A lower body weight generally means a different resting energy requirement, and changes in activity or body composition can also affect maintenance calories.
Recalculating after a meaningful change in body weight can provide a useful new starting estimate.
What if your weight does not change despite a calorie deficit?
A lack of visible progress does not automatically mean your metabolism is broken.
Consider several possibilities:
Food intake may be higher than recorded.
Everyday movement may have decreased.
Water retention may temporarily mask fat loss.
The estimated maintenance calories may be inaccurate.
The observation period may be too short.
Changes in medication or health may affect weight and energy expenditure.
If you have persistent unexplained weight changes or symptoms suggesting a medical issue, discuss them with a qualified healthcare professional rather than continually lowering your calorie intake.
BMR by Age: A Reference Chart and Its Limitations {#bmr-by-age}
The following table shows estimates using the Mifflin–St Jeor equation for two hypothetical adults:
Reference man: 175 cm and 75 kg
Reference woman: 163 cm and 62 kg
Age | Reference man (kcal/day) | Reference woman (kcal/day) |
|---|---|---|
20 | 1,749 | 1,378 |
30 | 1,699 | 1,328 |
40 | 1,649 | 1,278 |
50 | 1,599 | 1,228 |
60 | 1,549 | 1,178 |
70 | 1,499 | 1,128 |
These values are examples, not age-based calorie recommendations.
The Mifflin–St Jeor equation subtracts five calories for every additional year of age. This creates a predictable decline in the calculated result.
However, real-world changes in energy expenditure are more complex.
What does research say about metabolism and aging?
A major 2021 study published in Science by Pontzer and colleagues examined energy expenditure across the human life course using a large international dataset.
The researchers found that fat-free-mass-adjusted total daily energy expenditure remained broadly stable from approximately age 20 to 60 before declining in older adulthood.
The study also examined basal energy expenditure, which showed broad stability during much of adulthood, although the number of basal measurements was smaller and estimates were less precise.
This distinction matters: the study examined measured energy expenditure adjusted for body composition, while the chart above uses a predictive equation with a fixed age coefficient.
The two are not measuring or describing exactly the same thing.
In everyday life, changes in physical activity, muscle mass, health and body composition can all affect calorie needs as people age.
The chart should therefore be used as a mathematical reference, not as proof that every person's metabolism follows the same age-related pattern.
Can You Raise Your BMR? {#raise-bmr}
The honest answer is that some lifestyle changes can influence resting energy expenditure, but the effect is usually more modest than supplement marketing suggests.
1. Build and maintain muscle
Skeletal muscle uses energy even at rest, although its resting energy requirement per kilogram is much lower than that of highly active organs.
Using the approximate estimate of 13 kcal/kg/day, adding 2 kg of muscle would theoretically contribute around 26 kcal/day to resting energy expenditure.
The actual effect varies between individuals.
Strength training is still highly worthwhile because it supports muscle function, strength, bone health and long-term physical performance.
2. Eat enough protein
Protein has a higher thermic effect than carbohydrates or fat.
That means the body uses more energy to digest and process protein.
Protein also supports muscle maintenance and recovery, particularly during resistance training and weight loss.
However, eating more protein does not produce a dramatic increase in BMR by itself.
3. Avoid unnecessarily aggressive dieting
Large calorie deficits can contribute to loss of lean mass and changes in energy expenditure.
Weight loss also reduces the energy required to maintain a smaller body.
A more sustainable approach generally involves an appropriate calorie deficit, adequate protein and resistance training where suitable.
4. Consider thyroid and other medical conditions
Thyroid hormones influence metabolic processes.
Conditions affecting thyroid function can change energy expenditure and may contribute to symptoms such as fatigue, changes in body weight and altered temperature tolerance.
If you suspect a thyroid or other medical condition, seek professional assessment rather than relying on a calculator.
5. Be cautious with metabolism boosters
Caffeine and some spicy foods can produce small, temporary changes in energy expenditure.
These effects should not be confused with a meaningful long-term increase in resting metabolism.
Products marketed as metabolism boosters often promise more than the evidence supports.
When a BMR Calculator May Not Be Enough {#when-calculators-are-not-enough}
A standard BMR calculator is designed to provide a general estimate. It is not a diagnostic tool and may be less suitable in certain circumstances.
Consider professional guidance or measured resting energy expenditure when:
You are an athlete with unusual body composition or demanding training requirements.
You have a medical condition that may affect metabolism or nutritional needs.
You are experiencing unexplained weight changes.
You are pregnant or breastfeeding.
You are recovering from significant illness or surgery.
Your nutritional requirements need to be managed as part of medical treatment.
What is indirect calorimetry?
Indirect calorimetry is a method used to measure energy expenditure by analysing oxygen consumption and carbon dioxide production.
Under appropriate testing conditions, it can provide a more direct estimate of resting energy expenditure than a prediction equation.
It is available in some hospitals, research centres and specialist nutrition settings.
However, even a laboratory measurement represents a result under particular testing conditions. It should be interpreted in the context of the person's health, activity and nutritional needs.
For most healthy adults seeking general weight-management guidance, a well-chosen prediction equation combined with consistent real-world tracking is a practical starting point.
The Bottom Line {#bottom-line}
BMR is an important part of your daily energy requirements, but a calculator cannot measure your metabolism directly.
Mifflin–St Jeor, Harris–Benedict, Schofield, Henry, Katch–McArdle and Cunningham each offer a different way to estimate resting energy expenditure.
Their results can differ substantially for the same person. Research also shows that an equation may overestimate or underestimate resting metabolism in particular populations.
The most important lesson is not to search endlessly for the highest or lowest calculator result.
Instead:
Choose a reasonable equation for your circumstances.
Use the estimate as a starting point for calculating maintenance calories.
Track food intake and body-weight trends consistently.
Make small, sensible adjustments when needed.
Reassess when body weight, activity or health circumstances change.
A calculator gives you a starting number. Your actual energy needs are best understood by combining that estimate with reliable measurements, consistent habits and individual circumstances.
Frequently Asked Questions {#faq}
1. What is the most accurate BMR equation?
Mifflin–St Jeor performed comparatively well in a 2005 systematic review of commonly used resting metabolic rate equations. However, no equation is accurate for every individual. Population characteristics, body composition and individual variation all influence prediction accuracy.
2. What is the difference between BMR and RMR?
BMR is measured under stricter conditions, including an overnight fast, physical rest and a thermoneutral environment. RMR is measured under less restrictive conditions and is generally slightly higher. Many online calculators use similar equations for both.
3. Is BMR lower in Indian and Chinese populations?
Some research has found that commonly used equations overestimate average BMR in particular Asian populations. However, the findings vary by population and equation. They do not establish that every Indian, Chinese or South Asian individual has a lower BMR.
4. Should South Asians subtract 10% from their BMR calculator result?
No. Research showing an average overestimate in a population does not establish a reliable correction for every individual. Use the calculator result as a starting estimate and evaluate your actual energy needs using consistent intake and weight trends.
5. Does BMR decrease with age?
Age is one factor in resting energy expenditure, but the relationship is more complex than a simple yearly decline. Changes in body composition, physical activity and health also matter. Large research has found broadly stable fat-free-mass-adjusted energy expenditure through much of adulthood, followed by declines in older age.
6. Can building muscle increase BMR?
Yes, but the direct effect is relatively modest. Skeletal muscle uses approximately 13 kcal per kilogram per day at rest according to commonly cited tissue-specific estimates. Strength training remains valuable for many health and functional benefits beyond its effect on BMR.
7. Why do different BMR calculators give different results?
They may use different equations, development populations and input variables. Some use total body weight, height and age, while others use estimated lean body mass. Differences of 100–200 calories or more are possible.
8. Is BMR the number of calories I should eat every day?
No. BMR estimates energy expenditure at rest. Your daily maintenance calories are generally higher because they include physical activity, digestion and other energy-consuming processes. Use a TDEE estimate rather than treating BMR as your daily calorie target.
9. Can I measure my BMR at home?
You can estimate it with a calculator, but a standard home scale or fitness tracker does not directly measure BMR. Indirect calorimetry in a suitable clinical or laboratory setting is a more direct method of measuring resting energy expenditure.
10. Does eating less than my BMR cause weight loss?
Body-weight change depends on total energy intake compared with total energy expenditure, not on whether intake is above or below BMR alone. However, very low calorie intake can create nutritional and health risks. A suitable calorie target should consider your overall needs and health circumstances.
References & Sources
Mifflin, M. D., St Jeor, S. T., Hill, L. A., Scott, B. J., Daugherty, S. A., & Koh, Y. O. (1990). A new predictive equation for resting energy expenditure in healthy individuals. The American Journal of Clinical Nutrition, 51(2), 241–247. https://doi.org/10.1093/ajcn/51.2.241
Roza, A. M., & Shizgal, H. M. (1984). The Harris Benedict equation reevaluated: Resting energy requirements and the body cell mass. The American Journal of Clinical Nutrition, 40(1), 168–182. https://doi.org/10.1093/ajcn/40.1.168
Frankenfield, D., Roth-Yousey, L., & Compher, C. (2005). Comparison of predictive equations for resting metabolic rate in healthy nonobese and obese adults: A systematic review. Journal of the American Dietetic Association, 105(5), 775–789. https://doi.org/10.1016/j.jada.2005.02.005
Henry, C. J. K. (2005). Basal metabolic rate studies in humans: Measurement and development of new equations. Public Health Nutrition, 8(7A), 1133–1152. https://doi.org/10.1079/PHN2005801
Wang, X., et al. (2023). Predictive equation for basal metabolic rate in normal-weight Chinese adults. Nutrients, 15(19), 4185. https://doi.org/10.3390/nu15194185
Camps, S. G., Wang, N. X., Tan, W. S. L., & Henry, C. J. K. (2016). Estimation of basal metabolic rate in Chinese: Are the current prediction equations applicable? Nutrition Journal, 15, 79. https://doi.org/10.1186/s12937-016-0197-2
Elia, M. (1992). Organ and tissue contribution to metabolic rate. In J. M. Kinney & H. N. Tucker (Eds.), Energy Metabolism: Tissue Determinants and Cellular Corollaries. Raven Press.
Wang, Z., et al. (2010). Specific metabolic rates of major organs and tissues across adulthood: Evaluation by mechanistic model of resting energy expenditure. The American Journal of Clinical Nutrition. https://doi.org/10.3945/ajcn.2010.29885
Pontzer, H., et al. (2021). Daily energy expenditure through the human life course. Science, 373(6556), 808–812. https://doi.org/10.1126/science.abe5017
MacrosMeasure. Free BMR Calculator.
MacrosMeasure. Free TDEE Calculator.
MacrosMeasure. Body Fat Calculator.
Calculate your own numbers — free.
18 science-backed calculators covering everything in this article and more.
